NetComm Wireless NF5 Setup Guide

8  PHYSICAL CONNECTION

4 Take an Ethernet cable to connect your modem with the blue WAN port of the router.

4 Then take another Ethernet cable to connect your computer with one of the Yellow LAN port of the router.

8 LOGIN TO THE MANAGEMENT PAGE OF THE ROUTER

4 Open your web browser, find the address bar and type in http://192.168.20.1

4 After successful login, please choose your access method DHCP or PPPoE

4 Under Wireless, change WiFi Network Name to your preffered name and save changes.

4 Select Wireless security Key to set an 8 characters  password settings for your Wi-Fi and click on Save.

4 click on " Switch to advanced view "

4 Click on the Network settings and go to change the password, to change it from admin to your choice.

4 Finally click on the Security Settings, go to Remote Administration  and enable it.

    NOTE: This needs to be enabled only in case of trouble shooting and when asked by your Technical Support Officer.

Please click below, For Video Guide :